The natural choice for the shop floor

ZEISS DuraMax

Quality assurance is demanding and CMM requirements are high – especially in the production environment. ZEISS DuraMax combines robustness, precision and efficiency, making it the perfect choice for at-line measurement directly in your production hall. ZEISS DuraMax is not deterred by harsh environmental conditions and withstands even high temperatures. In conjunction with the ZEISS VAST sensor, it enables fast single-point measurements as well as scanning of contours and free-form surfaces, making fixed gauges superfluous.

All benefits at a glance

Efficiency

Optimal measurement volume/ footprint ratio

Space-saving design for a small footprint
Generous and easily accessible measuring volume
Loading from three sides and from above
No compressed air required

Speed

Reduced operating times and fast measurements

Fast scanning with ZEISS VAST XXT
Single-point measurements with ZEISS VAST probing
ZEISS Duplex System for increased throughput
Four-axis measurement with rotary table

Precision

Precise results even in harsh environments

Dust and moisture protection
IP54 rated ShopFloor base
Thermal stability due to glass ceramic scales
Linear drive nut and ball bearing guiding system with covered guiding in all axes
Passive vibration damping as standard

Fully equipped for your challenges

Discover the unique features of ZEISS DuraMax

ZEISS VAST XXT

ZEISS VAST XXT allows single-point measuring and scanning. This offers optimal productivity with stable results. The scanning technology enables the measurement of a massively higher point density and thus a better evaluation of size, shape and position tolerances. A wide spectrum of styli allows you to measure more complex features on more parts!

Learn more

Rotary table

In combination with the optional rotary table, you gain even greater flexibility for rotational symmetrical small parts, allowing you to measure complex tasks with a fourth axis. This not only reduces the complexity of stylus systems, but also the operating time due to fewer probe changes.

Measurement volume

ZEISS DuraMax offers an unbeatable measuring volume/footprint ratio. Optimal accessibility, a clear view into the measuring volume as well as loading at an optimal working height from three sides and from above improve ergonomics and safety and reduce operating times.

Pneumatic vibration isolation

The optional pneumatic vibration isolation prevents the influence of ground vibrations on measurement results and provides automatic level control. It can also be retrofitted for ZEISS DuraMax and ZEISS O-INSPECT.

ZEISS CALYPSO

The intuitive software ZEISS CALYPSO offers a high level of flexibility for different measurement tasks, while ZEISS CALYPSO express enables simple programming. The single-point mode for ZEISS DuraMax now also allows you to operate your tactile sensor in ZEISS VAST probing mode, saving you up to 25-80% measurement time depending on the task.

Learn more

Temperature resistivity

All axes are equipped with glass-ceramic scales. These do not expand with increasing temperature, allowing stable measurements at temperatures from +18 °C to +30 °C. The IP54 base protects the computer hardware.

Accessories

ZEISS Integration Series enables the flexible expansion of your measurement solution for optimal integration into your existing processes and an increase in productivity and throughput.

Discover all products

Even less temperature-sensitive, even more robust

ZEISS DuraMax HTG

ZEISS DuraMax HTG offers the widest temperature range with the highest temperature gradient and can be operated both at the production site and in automation systems. This provides more flexibility as you can perform your measurement tasks with even more resistance to environmental influences.

Highlights

Precise measurement at high temperatures
Zerodur scales for smallest possible heat expansion
Temperature sensors for workpiece temperature correction
Additional filter pads in the X- and Y-axis to protect against dirt and dust

See how to use ZEISS DuraMax successfully

Fast tactile single point probing

ZEISS DuraMax with ZEISS VAST probing (ZEISS ZVp) offers the advantage of shortening measurement times thus reducing operating costs. With ZVp mode it is possible to reduce measuring time of single point probing up to 30 %.

A Race Against Time

Racing places special demands on measuring technology

Learn more

Even the Machines Are Flexible

Volkswagen accelerates quality inspection in engine production

Learn more

Gold medal for newcomers

Chinese college trains future engineers on ZEISS machines

Learn more

Matching solutions for every measurement task

ZEISS Integration Series

The product range of ZEISS Integration Series allows for flexible expansion of your measurement solution to ensure optimal integration into your existing processes and for an increase in productivity and throughput.

Duplex system

The duplex system for ZEISS DuraMax improves machine utilization, as the workpieces can be clamped and unclamped in parallel to the measuring process. In addition, the system improves the ergonomics of part handling and prevents damage to the measuring sensors

Setup during the measurement process

Optimized CMM utilization
High throughput of workpieces

GageStation

With ZEISS PiWeb, the GageStation combines measurement data from handheld measuring devices with CMM measurement data and visualizes them in a comprehensible manner via touch screens and measurement report templates. The GageStation requires little space and offers protection from environmental influences in the production environment that can falsify measurement results.

Consolidation of all quality data in one report

Data acquisition independent of measuring equipment
Centralized data handling
Protection against environmental influences

Compatible with ZEISS DuraMax and ZEISS Optical Series.

Automation Interface

The ZEISS Automation Interface allows you to easily automate your measuring device without any engineering effort. In addition to starting inspection plans and providing feedback on measurement results or machine status, the application allows you to control CMM peripherals. The interface is also preconfigured for all products in the ZEISS Integration Series. For example, the control of automatic fixtures or the pallet feed can be configured effortlessly with just a few clicks. Individual fixtures developed by you can also be controlled via configuration.

Easy automation of the CMM periphery

Standardized communication interfaces: OPC UA, Profinet, EthernetIP
User administration allows plant operators, measuring technicians, setters or service to see exactly what they need
Can be used in both automatic and manual mode even by untrained operators
Simple configuration by click and directly via the user interface, without complex PLC programming
Efficient commissioning with low project risks and low costs

Discover all products

Technical specifications

ZEISS DuraMax

	DuraMax	DuraMax HTG
Measuring volume	500 x 500 x 500 mm³	5000 x 500 x 500 m³
Length measurement error E0 in μm E0/E40 in µm MPE according to ISO 10360-2:2009	2.4 + L/300 18°C - 22°C	2.2 + L/300 18°C - 22°C
Extended temperature range (ZEISS TVA 1) E0/E40 in µm	2.7 + L/250 18°C - 26°C	2.5 + L/250 18°C - 26°C
Extended temperature range (ZEISS TVA 2) E0/E40 in µm	2.9 + L/200 18°C - 30°C	2.7 + L/200 18°C - 30°C
Extended temperature range (ZEISS TVA 3) E0/E40 in µm	not available	3.9 + L/100 15°C - 40°C
Software	ZEISS CALYPSO	ZEISS CALYPSO
Tactile Sensor	VAST XXT TL 3	VAST XXT TL 3
Stylus length	radially up to 65 mm (star stylus)	radially up to 65 mm (star stylus)
Probe diameter	0.3 - 8 mm	0.3 - 8 mm

All information about ZEISS DuraMax at a glance

Please fill out the form below to download the onepager

{{ country.fda_text }}